Cell Phone: 214-548-9853 Phone: 972-292-1426 (Currently having problems) tim@hangartoolbox.com

Cart is Empty
-------------- Total: $0.00

Comache Bungee Tool (Little Flyers)
Comache Bungee Tool (Little Flyers)

This Comanche bungee tool is hydraulically operated and designed by Little Flyers (ourselves). The tool is the combination of a modified hydraulic cylinder matched with a hand hydraulic pump. Jack the aircraft and retract the landing gear. The tool is set inside the bungee cord with the round end outboard. Using the attached hydraulic pump, pressure is applied to the narrow hydraulic cylinder. The fork end will pass around the roller on the gear arm lifting the bungee off the roller. The pressure on the cylinder is then relieved and the bungee cord will retract to its normal state. The bungee tool is removed from the bungee and the cord can be twisted counter clockwise to the remove the outboard retainer (with cord). With this tool, the gear is not operated to remove and install the bungee cords; only one person is necessary to use the tool. One client wrote "it only took me about 1 1/2 hours to do the whole job". New price is for the system we rent. The new tool is available with other pumps at a lower cost. Contact us with other questions.
LxWxH: 14.0 x 2.0 x 1.0 Weight: (New) 7.570 (Rental) 7.570
Price: $600.00 Rent: $20.00 Deposit: $180.00 Rental Days: 11



Send mail to tim@hangartoolbox.com with questions or comments about this web site.
Copyright © 2007-2010 Hangar Toolbox