Cell Phone: 214-548-9853 Phone: 972-292-1426 (Currently having problems) tim@hangartoolbox.com

 
Cart is Empty
-------------- Total: $0.00



Aero-Grinder Exhaust Port Grinder
Aero-Grinder  Exhaust Port Grinder

PN:M92
The Aero-Grinder refinishes the exhaust port flange of the cylinder while the cylinder is installed on the engine. The tool works on Lycoming angle valve downdraft and parallel valve models, and TCM O-200, O-300, E-225, 470, 520 with the single valve covers. It incorporates a small air-powered die grinder that is attached to an arm and plate system. The arm shaft has a number of adjustments for aligning the die grinder to the flange surface. A 2-1/8" grinding disc refinishes the surface of the port to a like new condition. This tool is an alternative to removing the cylinders for exhaust port grinding. The exhaust studs need to be removed in order to finish the surface; we will combine this tool with exhaust stud removal/intstallation kits for your particular engine. Call for more information.
LxWxH: 16.0 x 11.0 x 7.0 Weight: (Rental) 21.000
Rent: $78.00 Deposit: $270.00 Rental Days: 12


 
 


Tool Instruction Links
Aero-Grinder Information


 

Send mail to tim@hangartoolbox.com with questions or comments about this web site.
Copyright © 2007-2010 Hangar Toolbox


SiteMap