Cell Phone: 214-548-9853 Phone: 972-292-1426 (Currently having problems) tim@hangartoolbox.com

 
Cart is Empty
-------------- Total: $0.00



Aircraft General
Common tools for working on aircraft


       
 
Dzus tooling kit
PN:
Dzus tool used for replacement of Dzus studs with grommets. This will not set wing studs....
Rent: $13.00
Deposit: $29.00
 
1/8" tubing bender
PN:
Tubing bender for bending 1/8" tubing with 180 degree bend and 3/8" radius used on aluminum, brass, copper and annealed steel...
Rent: $9.00
Deposit: $14.00
 
Camloc Installation Pliers
PN:Camloc 4P3
These pliers are for installation of Camloc's of various sizes of the 2600, 2700, and 4002 series camlocs. The pliers will install the wing, slotted,...
Rent: $6.00
Deposit: $6.00
 
Airloc Pliers
PN:Airloc Pliers
These pliers assist with the removal and installation of pins on the small Airloc and Camloc fasteners. ...
Rent: $7.50
Deposit: $10.50
 
Airloc pin remover and installer
PN:9996-5
The tool removes and installs pins on Airloc fasteners with shank size of 0.26"....
Rent: $10.00
Deposit: $20.00
 
Airloc pin remover and installer
PN:9996-7
The tool removes and installs pins on Airloc fasteners with shank size of 5/16"....
Rent: $10.00
Deposit: $20.00
 
1/4" tubing bender
PN:
Tubing bender for bending 1/4" tubing with 180 degree bend and 9/16" radius used on aluminum, brass, copper and annealed steel...
Rent: $9.00
Deposit: $15.00
 
3/8" tubing bender
PN:
Tubing bender for bending 3/8" tubing with 180 degree bend and 15/16" radius used on aluminum, brass, copper and annealed steel...
Rent: $11.00
Deposit: $24.00
 
1/2" tubing bender
PN:
Tubing bender for bending 1/2" tubing with 180 degree bend and 1 1/2" radius used on aluminum, brass, copper and annealed steel...
Rent: $14.00
Deposit: $28.00
 
5/8" tubing bender
PN:
Tubing bender for bending 5/8" tubing with 180 degree bend and 2 1/4" radius used on aluminum, brass, copper and annealed steel...
Rent: $14.00
Deposit: $35.00
 
Imperial 37 degree tube flaring kit
PN:Imperial 37 degree tube flaring kit
5 piece kit of Imperial Eastman tools for creating 37 degree flares on aluminum, copper, annealed stainless and annealed steel tube. Consists of: 400-...
Rent: $40.00
Deposit: $150.00
 
Parker tubing beading tool set
PN:
Tool set used for installing beads on tubing for securing hoses with clamps...
Rent: $30.00
Deposit: $113.00
 
Nicopress crimper
PN:64-CGMP Oval
Crimping tool for Nicopress sleeve and stop sleeve size C, G, M and E (1/16" through 5/32" cable)....
Rent: $13.00
Deposit: $54.00
 
Kearney #6-5 roll swaging machine
PN:
Swaging machine used for swaging control cables with MS type terminals onto galvanized and stainless steel cables from 1/16" diameter through 1/8" dia...
Rent: $200.00
Deposit: $900.00
 
Nitrogen servicing gauge
PN:
Gayston Gage Pressure dial indicating Type 0-1500 kit used to service Nitrogen to aircraft struts...
Rent: $21.00
Deposit: $75.00
 
Gast vacuum shop test unit
PN:VG2187
Gast VG2187 Venturi vacuum shop test unit used for applying vacuum to aircraft gyro and autopilot systems. This comes with a regulator....
Rent: $17.00
Deposit: $45.00
 
Cable tensiometer
PN:T5-2002-101-00
T5-2002-101-00 model cable tensiometer used for checking 1/16" cables through 1/4" cables (150 lb) tensions; includes instruction book and calibration...
Rent: $65.00
Deposit: $249.00
 
Pacific cable tensiometer
PN:C-9
Pacific C-9 cable tensiometer model T60-1001-C9-1A used for checking flight control cables with calibrated range of 150 lbs to 450 lbs. It checks tens...
Rent: $26.00
Deposit: $83.00
 
Brake lining rivet tool
PN:TP950
US Industrial Tool TP950 brake lining rivet tool used for installing brake rivets for Cleveland and other brass-type semi-tubular small aircraft brake...
Rent: $6.00
Deposit: $9.00
 

 

Send mail to tim@hangartoolbox.com with questions or comments about this web site.
Copyright © 2007-2010 Hangar Toolbox


SiteMap