Cell Phone: 214-548-9853 Phone: 972-292-1426 (Currently having problems) tim@hangartoolbox.com

 
Cart is Empty
-------------- Total: $0.00



Bars 1 to 1.3 Lbs.
Bucking bars weighing between 1 Lb and 1.3 Lbs.


 

 
Item ID Length Width Weight Price Rent Deposit Rental period
(MC1) Bucking bar - very profiled offset type 4.1 1.9 $2.80 $12.00 15
Bucking bar has several cuts in it. Offset relief is 1" x 0.375", foot area is 0.85" x 0.75", toe ar...
(MC2) Bucking bar - flat offset angle 4.6 2.0 $2.80 $12.00 15
This bucking bar has often been used for windshields (retaining strips) on smaller engine Cessna air...
(MC3) Custom bucking bar - T - style 3.0 2.4 $3.50 $15.00 15
Bucking bar is in the form a "T". The bar has several surfaces ground. Top of "T" is 2.4" x 1.25",...
(MC4) Custom bucking bar - Countersunk nutplate ty 2.2 1.5 $3.20 $13.50 15
Bucking bar is designed for installing countersunk nutplates in restricted areas. Works on MS21047,...
(MC5) Custom bucking bar - Severe angle offset typ 8.0 2.0 $2.80 $12.00 15
Bucking bar is made from 0.25" thick, 2" wide bar. The bar is a offset type with a handle. The bar...
(MC6) Custom bucking bar - Angle type 4.1 1.3 $2.80 $12.00 15
Bucking bar has one angle on it. Parallelogram surface is 0.9" x 1.3". Has threaded hole for a han...
(MD1) Custom bucking bar - Double angle type 3.2 1.9 $2.80 $12.00 15
Bucking bar has two angles and some reliefs on it. Major angle surface is 2.6" x 1.3", bottom surfa...
(MD2) Custom bucking bar - Angle type 5.3 1.0 $2.80 $12.00 15
Bucking bar has one angle and surface. The angle surface is 0.7" x 0.9" ...
(MD3) Custom bucking bar - Bar type 2.9 2.0 $2.10 $9.00 15
Bucking bar has one end and two sides ground. The end has three reliefs in it. All are 0.1" deep. ...
(MD4) JP Tools 08-656 5.3 2.5 $2.50 $10.50 15
This is a 656 type bar similar to others currently manufactured. Three ground surfaces are on this ...
(MD5) Custom bar - Bar type 5.9 2.0 $1.75 $7.50 15
Bar is 3/8" thick, 2" wide flat stock. ...
(MD6) JP Tools 08-112 - modified 5.4 2.0 $2.45 $10.50 15
This a TP1112 type bar with some additional reliefs. One end is standard with an angled surface of ...
(ME1) Custom bar - L shape 3.9 2.2 $2.80 $12.00 15
Bar is a forged type with three ground surfaces. Bottom surface is 0.9" x 2.0"; toe and top are 0.9...
(ME2) Stringer bar 3.6 1.7 $2.80 $12.00 15
This is a bar designed for riveting stringers. Stringer surface is 0.45" x 1.7", and a 1" x 0.2" re...
(ME3) Offset stringer bar - Modified 5.0 2.0 $2.80 $12.00 15
This is a bar designed for riveting stringers. Stringer surface is 2.0" x 0.65", and a .9" x 0.35" ...
(ME4) Custom bar - nutplate type 2.5 1.5 $2.80 $12.00 15
Bar is designed for installing MS21047, MS21049, MS21051, MS21055, and other MS 6-32, 8-32, and 10-....
 

 

Send mail to tim@hangartoolbox.com with questions or comments about this web site.
Copyright © 2007-2010 Hangar Toolbox


SiteMap