Cell Phone: 214-548-9853 Phone: 972-292-1426 (Currently having problems) tim@hangartoolbox.com

 
Cart is Empty
-------------- Total: $0.00



Bars up to 1 Lb.
Bucking bars weighing less than 1 Lb.

General Notes for this page
Bucking bars do not include shipping

 

 
Item ID Length Width Weight Price Rent Deposit Rental period
(M1) Modified TP670A 2.8 1.0 $2.50 $11.00 15
This bucking bar is one half of the standard TP670 bucking bar. Foot is 1" by 1-3/4". Length is 2-...
(M2)Custom bucking bar 3.5 1.5 $2.00 $9.00 15
Bucking bar is made from carbon steel. 3.5" long, 1.5" wide, and 0.5" thick. The bar has several a...
(M3) TP-662 modified 5.2 2.0 $2.40 $11.00 15
Standard TP662 bucking bar that has be shortened for restricted areas. LxWxD 5.25" x 2" x 1.5". Cu...
(M5) Custom bucking bar 5.2 0.7 $2.10 $9.00 15
Carbon steel bucking bar. LxWxD 5.2" x 0.75" x 0.625". Weight 0.635 Lbs. ...
(M4) Custom bucking bar 2.9 1.2 $2.10 $9.00 15
Rectangular bucking bar. 2.875" x 1.25" x 0.625". The bar has a cut in the side at 1.25". ...
(M6) Custom bucking bar for curve 5.5 3.0 $2.80 $12.00 15
Bucking bar surface has a curve on it. Material is probably carbon steel. The handle is welded on....
(MA1) Custom bucking bar - odd shape 2.4 1.6 $2.80 $12.00 15
Bucking bar has a number shapes and angles on it. Large face 2.375" x 1.625". Small 0.5" x 1.625"....
(MA2) Custom bucking bar - bent form 3.8 2.0 $2.10 $9.00 15
Bucking bar has a bend in it with a short welded end. Bar material is 3/8" carbon steel in 2" width...
(MA3) Custom bucking bar - foot type 2.5 2.2 $2.80 $12.00 15
Bucking bar is polished at the foot. Boot has a spur on it for a restricted area. Spur surface is ...
(MA4) Custom bucking bar - restricted area type 3.8 2.0 $2.80 $12.00 15
Custom bucking bar has a number of ground surfuces on it. Material is from a forging. Bar is not w...
(MA5) Forged bucking bar - modified foot type 3.6 1.8 $2.50 $10.50 15
Bucking bar has two ground surfaces. One surface end is 1.75" x 0.875", and the other is 0.875" x 0...
(MA6) Custom bucking bar - dolly type 2.9 1.5 $2.50 $10.50 15
Bucking bar is made from a matel forming dolly. Ground surfaces are the back of the "P" and the bot...
(MB1) Bucking bar - angle type 4.0 1.3 $2.10 $9.00 15
Bucking bar has one angled surface on it. Parallelagram face is 1.6" x 0.8". ...
(MB2) Bucking bar - angle type 4.3 1.3 $2.10 $9.00 15
Bucking bar is the reverse of the MB1 bar. Parallelagram face is 1.6" x 0.8". This bar has a thread...
(MB3) Bucking bar - TP608 foot type 4.0 1.5 $2.50 $10.50 15
This bar is similar to a TP608 bar. Foot is 1.5" x 0.75", toe is 0.5" x 0.75", and top is 1.0" x 0....
(MB4) Custom bucking bar - flat type 3.0 1.5 $2.50 $10.50 15
This bucking bar was made from a rear spring on truck. Two edges are round but not ground; the flat...
(MB5) Custom bucking bar - bent reverse type 10.5 1.0 $2.50 $10.50 15
This bucking bar was made from a cylinder base wrench and is used for a very restricted area. Bar i...
 

 

Send mail to tim@hangartoolbox.com with questions or comments about this web site.
Copyright © 2007-2010 Hangar Toolbox


SiteMap